The Peugeot 2008 is an urban crossover for people who want to sit higher than in a 208 but do not need a large SUV. In the second generation (from 2019) the most important points are: the wet timing belt in the 1.2 PureTech, the front suspension, which scores worse than average in TÜV tests, and the AdBlue system in the 1.5 BlueHDi diesel. As an authorised Peugeot service centre in Gdańsk Osowa, we check service campaigns by VIN and service the 2008 to the manufacturer's plan.

  • 2008 I and II, e-2008, 1.2 Hybrid
  • Belt check on the 1.2 PureTech
  • Front suspension and brakes
  • Service campaigns by VIN

Peugeot 2008: generations, production years and engines

The first generation was a raised estate based on the 208 I. The second, from 2019, is a full crossover about 4.3 m long on the CMP platform, shared with the Peugeot 208 II, Opel Corsa F and Mokka B. Since then there has also been an electric version, the e-2008. The facelift of the second generation brought, among other things, a 1.2 mild hybrid with a timing chain.

Peugeot 2008 generations. The engine version is confirmed by the engine code and VIN.
GenerationYearsEngines
2008 I2013–2019 (facelift 2016)Petrol 1.2 VTi/PureTech 82–130 hp, 1.6 VTi; diesels 1.4 HDi, 1.6 e-HDi/BlueHDi
2008 IIfrom 2019 (facelift 2023)Petrol 1.2 PureTech 100/130/155 hp; diesel 1.5 BlueHDi; electric e-2008; after the facelift also 1.2 Hybrid 48 V

Engines in the Peugeot 2008 II: what needs watching?

Most examples on the market have the 1.2 PureTech petrol engine. In its study of the 2008 II from October 2026, Autocentrum.pl stresses that the belt problem is well documented but the risk is conditional: high with short journeys and neglected servicing, low with a documented history and a newer timing system. Engines with a code beginning with EB2L have a chain instead of a belt.

  • 1.2 PureTech 100/130/155 hp: wet belt in the GEN1/GEN2 generations, possible excessive oil consumption and petrol in the oil. According to autocentrum.pl, if the belt fails, replacing it alone is not enough: the lubrication system must also be cleaned and the oil pump and vacuum pump checked.
  • 1.5 BlueHDi: no wet belt, but with a sensitive AdBlue and SCR system. On short trips the DPF is added to the list.
  • e-2008: according to owners, infotainment faults and drivetrain messages occur. During a service we read faults and check the software.
  • 1.2 Hybrid 48 V: a newer design with a chain and e-DCS6 gearbox. It is too early to judge durability, and it is worth keeping on top of software updates.

The EAT8 automatic in the 2008 II is generally praised for its smoothness. However, Autocentrum.pl draws attention to the importance of changing the gearbox oil and to the fact that more serious mechatronics faults usually appear at high mileages. We will give the scope of gearbox servicing for your car by VIN.

MoreThe 1.2 PureTech engine: everything about the wet beltHybrid and electric cars

The most common problems reported by Peugeot 2008 owners

Peugeot 2008 II: faults from TÜV reports, autocentrum.pl and service campaigns
ProblemSymptomWhat we do
Front suspension: wishbones, anti-roll bar linksKnocking, play, comments at the technical inspectionInspection on the lift, replacing worn parts, wheel alignment
Brakes: discs and calipersJudder when braking, uneven pad wearMeasuring the discs, servicing the caliper guides
Wet timing belt (1.2 PureTech)Oil pressure light on a cold start, loss of powerBelt measurement, lubrication check, checking Stellantis protection
Excessive oil consumption (1.2 PureTech)Top-ups between servicesMeasuring consumption according to the manufacturer's procedure
AdBlue and SCR (1.5 BlueHDi)Message about limited range before the engine can no longer be startedDiagnostics of the pump, sensors and lines
Moisture in the rear lightsMisted lensesAssessing sealing, a warranty claim if applicable

Autocentrum.pl cites the TÜV Report 2026 data: at the first technical inspection the 2008's front suspension is criticised noticeably more often than average, while among 4–5-year-old cars without defects the 2008 does better than the segment average. Older cars, 6–7 years old, already score below average. That is why, on a 2008 with higher mileage, we look at the suspension particularly closely.

The Peugeot 2008 was also covered by a campaign at the turn of 2022 and 2023 concerning the braking assistance diagnostics software. We will check by VIN whether your example has been through it.

Peugeot 2008 service plan: how often is it serviced?

The service plan depends on the engine and year, so we always start with the VIN. We change the oil according to the manufacturer's plan, and with mainly city driving it is worth doing so more often. On the 1.2 PureTech with a wet belt, the current recommendation is to replace the belt at 100,000 km or 6 years, and the belt itself is checked during services. On the e-2008, the service focuses on the brakes, suspension, fluids, cabin filter and high-voltage system diagnostics.

  • oil to the Stellantis specification given for the version, not a "similar" one;
  • checking the belt on PureTech engines and recording oil top-ups;
  • on diesels: DPF and AdBlue status, reading faults;
  • front suspension and brakes at every visit;
  • software updates and service campaigns by VIN.
Servicing in OsowaOil change in GdańskSuspension repairBrake pad and disc replacement

A used Peugeot 2008: what to look out for when buying?

  1. Check the engine code: EB2L means a chain, while older EB2 codes mean a wet belt.
  2. Ask for invoices from oil changes and information on when the belt was measured or replaced.
  3. Ask about oil top-ups. High oil consumption is a reason to talk about the price or walk away.
  4. On the test drive, listen to the front suspension over bumps and check the braking.
  5. On a diesel, read the AdBlue and DPF faults; on the e-2008, check charging and infotainment.
  6. Check service campaigns and the scope of Stellantis protection by VIN.
Pre-purchase checkPre-purchase car inspectionOpel Mokka: the same CMP platform

Peugeot 2008 service at an authorised centre in Gdańsk Osowa

As an authorised Peugeot service centre, we check campaigns by VIN, measure the belt with the manufacturer's tool and keep on top of updates. We service petrol and diesel versions, hybrids and the e-2008. We give a repair quote after the diagnosis, and you can book an appointment by phone on 58 552 55 25.

ContactAuthorised Peugeot service centreBook a visit

Frequently asked questions

Is the Peugeot 2008 a good choice as a used car?

The second generation has an average owner rating of 4.4 out of 5 on autocentrum.pl. It does well in town and on short trips, as long as the engine has been serviced on time and the front suspension is in good condition.

Which engine should I choose in the Peugeot 2008?

For low mileages the most commonly chosen is the 1.2 PureTech petrol, ideally with a documented history or in the newer version with a chain. The 1.5 BlueHDi diesel makes sense for high mileages on longer routes. The e-2008 will suit you if you can charge the car at home or at work.

Does the Peugeot 2008 II have a wet timing belt?

In 1.2 PureTech versions with the EB2 engine code from before the new generation, yes. Newer engines with a code beginning with EB2L have a chain. The 1.5 BlueHDi diesel and the e-2008 do not have this problem.

Why does my Peugeot 2008 knock at the front?

Most often the culprits are the anti-roll bar links or the wishbone bushes and ball joints. In TÜV reports, the front suspension is this model's weaker point. We will check it on the lift and tell you what needs replacing.

Sources