
The 1.2 PureTech is a three-cylinder petrol engine fitted since 2012 to Peugeots, Citroëns, Opels and DS cars. Its weak point in the GEN1 and GEN2 generations is the timing belt running in oil, which can crumble and clog the lubrication system. A well-serviced example with the right oil and a belt replaced on time can run for a long time, and an authorised service centre will check the belt condition and service campaigns for your car by VIN.
Which cars have the 1.2 PureTech engine?
The EB2 engine family, known as the 1.2 PureTech, was developed at Groupe PSA. It has three cylinders, two camshafts and variable valve timing. It comes in two main versions: naturally aspirated (approx. 68–82 hp, indirect injection) and turbo with direct injection (approx. 100–155 hp). After PSA and FCA merged, the engine also went into some models of other Stellantis brands.
| Brand | Example models |
|---|---|
| Peugeot | 208 (I and II), 2008 (I and II), 308 (II and III), 3008 II, 5008 II, 408 |
| Citroën | C3 III, C3 Aircross, C4 Cactus, C4 III, C5 Aircross, Berlingo |
| Opel | Corsa F, Astra L, Mokka B, Crossland X, Grandland X |
| DS | DS 3 Crossback, DS 4 |
| Others | including Jeep Avenger 1.2 with a manual gearbox, Toyota Proace City |
The engine code points to the generation. Older belt versions have codes such as EB2F, EB2FA, EB2DT, EB2DTS or EB2ADTD. The new chain generation has the letter L in the code, for example EB2LTED. Do not guess from the model year, because the same model could have had different versions in a single year.
What is the problem with the timing belt in oil?
A belt in an oil bath (a wet belt) runs more quietly and with less friction than a chain. The trouble is that in the 1.2 PureTech the belt material turned out to be sensitive to oil. Over time the belt swells, flakes and sheds fine particles of rubber. These particles circulate with the oil.
- They clog the oil pump pick-up strainer in the sump. Oil pressure drops and the engine can seize.
- They build up on the screens of the variable valve timing solenoid valves. The engine runs unevenly and faults appear.
- In turbo versions they can clog the filter of the vacuum pump that supplies the brake servo. The naturally aspirated version does not have such a pump.
Degradation is accelerated by petrol in the oil, short trips, oil changes that are too infrequent and oil outside the specification. The manufacturer admitted that fuel gets into the oil, and changed its service recommendations. Since mid-June 2022, GEN1 and GEN2 engines have been fitted with a new-generation belt made of a more durable material.
Because of the risk of losing brake assistance, service campaigns were run in some markets for turbo versions. They included a software update and a belt check, among other things. Whether your car has an open campaign can only be checked by VIN at an authorised service centre.
Symptoms of a worn belt in the 1.2 PureTech
A belt in oil does not usually snap "overnight". More often it first gives signs through the lubrication system. Do not ignore them.
- The oil pressure warning light or a low oil pressure message. This is a signal to stop the car immediately.
- The engine light and valve timing or oil pressure faults in the control unit's memory.
- A harder brake pedal and weaker brake assistance in turbo versions.
- Uneven running, juddering, loss of power.
- Oil disappearing between changes. Excessive oil consumption is the second known problem of these engines.
- Particles of rubber visible when changing the oil or on the strainer after the sump is removed.
The condition of the belt in this engine is assessed by measurement using the manufacturer's procedure, with a special tool. Judging "by eye" through the oil filler cap is not enough.
How often to replace the timing belt in the 1.2 PureTech, and which oil?
The manufacturer shortened the interval several times. Originally it was given as 180,000 km, then 160,000 km. The current recommendation for engines with a belt in oil is 100,000 km or 6 years, whichever comes first. Regardless of this, the belt is checked during services according to the manufacturer's plan.
| Area | Recommendation |
|---|---|
| Belt replacement | Every 100,000 km or 6 years (current recommendation, previously longer) |
| Oil change | As per the plan, no less often than every 25,000 km or once a year. For city driving, mechanics recommend more often, for example every 10–15,000 km |
| Oil specification | The PSA/Stellantis standard given for the version, most often B71 2312 (for example 0W-30). Some older versions allow other standards, for example B71 2290 |
| Oil level | Check regularly, note down top-ups |
In this engine, oil is not a detail. The belt runs in it all the time, so the wrong oil shortens its life. Check the standard for your car in the service book or by VIN. Viscosity chosen "by eye" or "whatever was on offer" is asking for trouble.
Stellantis extended protection for the 1.2 PureTech – what are the conditions?
In March 2024 Stellantis Polska confirmed an extension of protection for some EB2 PureTech engines in Citroën, DS, Opel and Peugeot cars. According to the announcement at the time, the protection covers 10 years or 175,000 km. A limit of 180,000 km appears on the brands' later pages. The exact limit for your car is confirmed by the authorised dealer workshop.
- Lack of oil pressure related to premature belt wear: engines produced from April 2014 to 20 June 2022.
- Excessive oil consumption: GEN1 produced up to 11 February 2022, GEN2 up to 22 February 2023.
- Services according to the manufacturer's plan, including outside an authorised dealer workshop. According to Stellantis Polska, invoices for the last three services are enough, with a tolerance of up to 3 months and/or 3,000 km.
- Diagnosis and repair of a fault covered by the protection are carried out in the manufacturer's authorised network.
In 2025 the Stellantis Support platform (stellantis-support.com) was launched. It lets you submit a claim for reimbursement of a repair you paid for yourself. According to a publication from May 2025, this applies to repairs from 2022–2024 carried out in the authorised network, on cars that meet the protection conditions. Poland is covered by the programme.
The programme conditions have changed and may change further. Do not base your decision on a forum or on this article. Come with your registration certificate and invoices. As an authorised Peugeot and Opel service centre, we check service campaigns by VIN.
1.2 PureTech reviews. Is it worth buying a car with this engine?
Opinions are polarised and both sides are right. There are examples that have covered over 200,000 km without major repairs. There are also ones in which the belt had to be replaced at 60–70,000 km. The difference is made mainly by the service history, the type of routes and the model year.
- Pros: low fuel consumption, good performance of the turbo version, low weight, low purchase cost.
- Cons: sensitivity to oil and intervals, risk of belt degradation in GEN1/GEN2, possible excessive oil consumption, carbon build-up in versions with direct injection.
- Biggest risk: cars from 2014–2019 driven mainly on short trips, with an unknown history.
- Lower risk: engines with the new-generation belt (from mid-2022) and the new chain generation.
The new generation reached the market in 2023 together with 48 V mild hybrids. It has a chain instead of a belt, many new parts and often the name "1.2 Turbo" or "Hybrid" instead of PureTech. It is too early to assess the durability of the chain. A service campaign concerning the fuel system has already been announced for this generation, so it is worth checking the VIN here too.
Buying a used car with the 1.2 PureTech? Ask for invoices for oil changes and the timing drive. If there is no history, start with a belt measurement, an oil change to the correct oil and a check for service campaigns.
Belt and service campaign checks in Osowa
We are an authorised Peugeot and Opel service centre and a Bosch Car Service. With the 1.2 PureTech we check service campaigns by VIN, measure the belt according to the manufacturer's procedure and select oil to the standard for your version. We also repair Citroëns, DS cars and other makes, and the advisor confirms the scope and price.
Serwis Osowa, Gdańsk Osowa, ul. Odyseusza 20, tel. 58 552 55 25. We work Mon–Fri 7:30–17:00 and Sat 9:00–14:00. Getting here from across Tricity is easy, including from the bypass.
Frequently asked questions
How long does the 1.2 PureTech engine last?
There is no single figure. With regular changes of the correct oil and a belt replaced on time, many examples exceed 200,000 km. A neglected engine with a GEN1/GEN2 belt may need a major repair much earlier.
Does the naturally aspirated 1.2 PureTech also have a belt in oil?
Yes, versions without a turbo also have a belt in an oil bath and are covered by the Stellantis protection programme. They do not, however, have a vacuum pump, so the brake assistance problem does not affect them.
What to do when the oil pressure light comes on?
Stop in a safe place and switch off the engine. Check the oil level, but do not drive on if the light comes back. Driving further without oil pressure can destroy the engine and make it harder to have a repair considered under the protection.
Do services outside an authorised dealer workshop remove the right to extended protection?
According to Stellantis Polska, no, provided the services were done according to the manufacturer's plan and you have invoices for the last three. Diagnosis and repair of a fault covered by the programme are carried out by an authorised service centre.
How can I check whether my Peugeot or Opel has a service campaign?
Most reliably by VIN at the brand's authorised service centre. Call us on 58 552 55 25 or book a visit online. We will check open campaigns for your Peugeot or Opel.
Sources
- Auto Świat: Warranty on 1.2 PureTech engines extended to 10 years and 175,000 km. Stellantis Polska's position, 26.03.2024
- Autobaza: Stellantis Support platform – reimbursement of PureTech repair costs, 12.05.2025
- Interia Motoryzacja: Is the 1.2 PureTech engine still a minefield? Mechanics have an answer
- Spider's Web Autoblog: We check what is happening with the 1.2 PureTech. Engine codes with belt and chain, 11.08.2025
- Honest John: Peugeot and Citroën 1.2 PureTech recall – brake servo vacuum pump, 02.2021


