Computer diagnostics at Serwis Osowa starts with reading the fault codes from the car's control units, but it does not end there. We compare the fault code with operating parameters, measurements and the symptoms you describe, and only then say what needs repairing. We diagnose cars of all makes, including US cars, hybrids and electric cars.
- Fault code read-out and analysis
- Live operating parameters
- Electrical measurements and road test
- All makes, including US cars
Is reading a fault code alone enough to know what to repair?
Usually not. A fault code tells you which system reported the problem, not which part is broken. For example, a lean mixture error can mean a leaking intake, a weak fuel pump, a dirty air flow meter or a faulty oxygen sensor. Replacing parts “on the strength of a code” often ends in another visit.
That is why diagnosis at our workshop has several stages. We read the faults from all available control units, check the freeze-frame data from the moment the fault occurred, watch the live parameters and, when needed, measure voltages, resistances and signals directly on the wiring.
What does car diagnostics look like step by step?
- A talk: when the symptom appears, on a cold or warm engine, at what speed, whether after refuelling or after rain.
- Reading the fault memory and freeze-frame data from the engine, gearbox, ABS/ESP, airbag and comfort control units.
- Analysing live parameters: temperatures, pressures, fuel trims, supply voltage.
- Measurements and actuator tests, and a road test if needed.
- The result: the cause, the proposed repair and a quote. We start work after your approval.
Faults that appear sporadically can be the hardest. If a warning light comes on once every few days, take a photo of the dashboard and note the circumstances. This greatly shortens the search for the cause.
Which warning light is on? Where to start
| Symptom | What we usually check first |
|---|---|
| Engine warning light (check engine) | Ignition, mixture, sensors, exhaust after-treatment system |
| ABS or ESP warning light | Wheel speed sensors, tone ring, wiring, control unit |
| DPF warning light or loss of power in a diesel | Differential pressure sensor, regeneration history, EGR valve |
| Battery or charging warning light | Charging voltage, alternator, belt, earth connections |
| Airbag warning light | Connectors under the seats, clock spring in the steering wheel, control unit |
| Gearbox message or limp mode | Gearbox control unit errors, oil level and condition |
Can I drive to the workshop with a warning light on?
It depends on the colour and the behaviour of the car. An amber warning light with the engine running normally usually lets you drive calmly to diagnostics. A flashing engine warning light, or a red warning light for oil pressure, coolant temperature or brakes, means you must stop and not continue driving. If in doubt, call before you go any further.
What to prepare before diagnostics?
- a description of the symptom: since when it has occurred, whether it is constant or appears only in certain conditions;
- information about recent repairs, because a fault after a part has been replaced is often related to it;
- a photo of the message or warning light, if it went out before the visit;
- whether any additional equipment has been fitted to the car, e.g. an alarm, a tow bar with a module or a multimedia installation.
After replacing some components, e.g. the throttle body, the steering angle sensor or a control unit, the car requires adaptation or coding. Missing this step is sometimes the cause of new faults, which is why during diagnostics we ask about the repair history.
Diagnostics of unusual cars: from the USA, hybrids and electric cars
Cars imported from the USA often have different control unit versions than their European equivalents, and hybrids and electric cars have additional modules managing the drive and the battery. When booking, give the year, version and origin of the car, so the service advisor can immediately assess what scope of diagnosis is possible.
Frequently asked questions
Will you clear the fault after diagnostics?
We can clear the fault memory, but clearing alone repairs nothing. If the cause remains, the warning light will return. We clear faults after a repair, or to check whether the fault recurs.
How much does computer diagnostics cost?
The cost depends on the car and how long finding the cause takes. A simple fault code read-out is one thing, and several hours of diagnosing a sporadic fault is another. The service advisor will tell you what to expect once you describe the symptoms.
Do you diagnose cars of all makes?
Yes. We service Opel and Peugeot as an authorised service centre, and other makes as a Bosch Car Service. We also diagnose cars from the USA.
The warning light went out by itself. Do I still need to come in?
The fault is usually stored in the control unit memory even when the warning light goes out. It is worth reading it, especially if the symptom recurs or concerns the brakes, airbags or gearbox.
